The floor panels system is also well suited to multi-storey applications. Standard ceiling finishes can be applied and electrical utilities can be run along the valleys of the Smartspan®, if desired a hanging ceiling can also be installed. The panel system also allows for a faster build time as there is no pouring of cement and time wasted while it cures, the panels are also much lighter with comparable strength.
To view how the system goes together click here
View our floor panel system product brochures, you are also able to save a copy. To view them you will require a PDF reader, which can be downloaded here.
The floor panel system uses the same click-lock installation as the roofing panel system. The flooring panels are screwed in the valleys to the C channel bearers to fix them in place. Yellow tongue panels are then used as flooring on top of the corrugations. The panels are run across the corrugations and are fixed using a high performance polyurethane silicon glue. Other flooring can then be laid on top of the yellow tongue as desired.
Key Features:
- Ease and speed of erection
- Elevated houses leave a much smaller environmental ”foot print”
- Site waste dramatically reduced
- Suitable for all sub-frames
- Completes the “thermal overcoat” recommendation for energy efficient housing
- Weather resistant
- FIRE SAFE
Ecohousing Building Systems has created a unique floor panel system. In elevated and two storey houses, Smartspan® zincalume cladded roof panels are utilized as floor panel with lengths up to 9 metres with 3.6 metre spans. Floor finish is usually yellow tongue screwed to the panel. The weight of the panels, in concert with their structural rigidity, allows for a reduction in total stumps required for elevated houses and very little use of concrete to anchor posts with no interference to the natural terrain. The insulation value is R 5.02 bare and increases with different coverings.
